This article outlines how to create and submit a crown under partial from 3Shape Unite software.
- Create a new patient profile or add a case under an existing patient.
- Choose 'Dandy Labs' under 'Scan & Send'.
- If the tooth receiving the crown supports or engages an existing partial denture, please capture a pre-prep scan in scan-only mode. Export and attach this scan to the lab slip before submitting your Dandy order so the lab can reference the original anatomy and ensure the new crown fits the appliance seamlessly.
- If you do not need a pre-op scan of existing anatomy, continue to step 5
- Complete scan-only pre-prep scan
- Conduct this in a 'Scan Only' setup, scanning only the arch with the original crown or temporary without the partial in place.
- Select Crown and Bridge from the clinical menu.
- Navigate to "Material: Crown" and pick your preferred material from the dropdown menu.
- Use "Shade" to select the desired shade, guided by your Vita classic shade guide.
- Add the pre-prep scan, navigate to the right side of the case setup page, and click the "additional scan" box.
- Click "Save" and input a delivery date.
- Scan the opposing arch as normal.
- If the patient has an existing partial on the opposing, scan with the partial in place.
- Scan the pre-prep scan without the existing partial in place.
- Scan the prep scan with the existing partial in place.
- Take bite scans with the partial in place.
- Review scans to ensure all scans are adequate.
- Submit your case.