Denture - Metal Mesh

INTENDED USE: 

Reinforce the denture and reduce the chances of midline fracture of the denture. 

COMPOSITION: 

Made from 316 Grade Stainless Steel
 

CAUTION / WARNING:

1) Ensure the device is used only by a qualified dentist or dental technician. 

2) Ensure the mesh is sandwiched adequately between acrylic and no sharp edges are left out, which may cause injury. 
 

INTERACTIONS WITH OTHER DENTAL MATERIALS:  

• No such Reactions Noted. 
• Please inform Dandy if an interaction arises.

 ADVERSE REACTIONS: 

• No such Reactions Noted.
• Please inform Dandy if a reaction is experienced.

STORAGE CONDITIONS: 

• Keep it locked up and out of the reach of children, as they may get hurt from sharp edges. 
• No other special storage conditions required. 

DISPOSAL CONDITIONS: 

Dispose of in accordance with local, state, and federal environmental regulations. This product is specifically formulated for use in dentistry and should be used only by qualified dental personnel. The brittle nature of acrylic denture base material makes the dentures vulnerable to breakage and midline fracture.
 

The reinforcement is made using

• 316-grade stainless steel. 

The thickness of the reinforcement mesh 

• is less than 0.25mm; 

The close perforations in the mesh facilitate acrylic homogeneity and ease of adaptation. Making the denture virtually unbreakable when the reinforcement mesh is sandwiched between layers of acrylic during the processing of the dentures. The mold space is then packed with a cellophane paper, which is placed between the halves, and a trial closure is done. After trial closure, the cellophane paper is removed, and a properly adapted reinforcement mesh is placed between the two halves of the final denture base, covering the entire palatal surface till the crest of the ridge. Sandwiching the Reinforcement mesh between the layers of acrylic dough. Then, the processed denture is pressed in a hydraulic press, bench-cured, and further processed. The denture is finished according to the requirements.

 ADA/CDT Codes