Adjusting the Scanner Click Sound in Chairside and Unite (Trios)

This guide provides step-by-step instructions on adjusting or muting the volume of the 'Click' sound produced by the scanner in both Chairside and Unite (Trios) software. This 'Click' sound is an audio cue indicating scan data capture.

Note: Adjusting these settings will not affect the scanner's mechanical clicking sound, which is quieter. It only alters the louder, software-generated 'Click' sound.

Adjusting Scanner Volume in Chairside

Step 1 - Access volume control by clicking on the 'Volume' button in the upper right-hand corner of Chairside.

 

Screenshot 2023-12-08 at 1.32.15 PM.png

Step 2 - Adjust the volume by moving the slider to your preferred level. Sliding it completely to the left will mute the scanner. ​

Screenshot 2023-12-08 at 1.32.51 PM.png

 

Adjusting Scanner Volume in Unite (Trios)

Step 1 - Access Settings

  • Click on the 'More' dropdown in the upper left-hand corner of Trios

Screen_Shot_2022-09-06_at_6.23.03_PM.png

  • Select the 'gear' icon from the dropdown.

Screen_Shot_2022-09-06_at_6.24.19_PM.png

Step 2 - Navigate to Sound Settings

  • Choose 'Trios' from the settings list.

Screen_Shot_2022-09-06_at_6.25.20_PM.png

  • Go to 'Scan Settings' from the Trios dropdown.

Screen_Shot_2022-09-06_at_6.26.33_PM.png

  • Proceed to the 'Sound' section.

Screen_Shot_2022-09-06_at_6.27.46_PM.png

Step 3 - Modify Sound Preferences

  • To mute the scanner, uncheck 'Use Sound Effects'. Alternatively, use the slider to adjust the volume as preferred.
  • Remember to save any changes you make by selecting the 'Yes' button when exiting.

Screen_Shot_2022-09-06_at_6.29.28_PM.png

Was this article helpful?
0 out of 1 found this helpful

Articles in this section

Live Support Hours
Monday - Friday: 8 am - 9pm ET Saturday: 9 am - 4 pm ET