Comprehensive Guide for Equipment Setup: Cart, Trios 3 Scanner, and Dell Laptop

This guide provides step-by-step instructions for assembling your cart, connecting the Trios 3 scanner, and setting up the Dell laptop.

Ensure these steps are completed at least 72 hours before your scheduled training. A quality assurance test will be conducted by our team 2-3 days before your Launch Training date.

Instructions for Cart Assembly

Team Assembly Recommended: Two people are advised for easier assembly.

Step-by-Step Process

  1. Insert and secure the 4 wheels into the H-shaped base using a wrench.
  2. Connect the pole to the base with 4 long screws and washers, tightening them with the Allen wrench.
  3. Attach the smaller bracket (printer tray) to the bottom shelf with short screws.
  4. Place and secure the bottom shelf at the desired height on the pole.
  5. Similarly, attach the larger bracket to the keyboard tray and secure it at the right height.
  6. Follow the same method to attach the basket to the back of the cart.
  7. Finally, place the cover on top of the pole.

Instructions for Dell Laptop Assembly


Setting up the Laptop

  1. Connect the power adapter to a wall outlet and the laptop.
  2. Turn on the laptop and connect it to Wi-Fi.
  3. Ensure continuous charging of the laptop during use, as the scanner requires significant battery power.

Instructions for Trios 3 Scanner Assembly

Scanner Components

The Trios 3 box contains 2 tiers of equipment and accessories, separated by black form. The contents are pictured and listed below include:

  • Wireless mouse
  • Multiple scanner mirror tips
  • Encased calibration target
  • Scanner base
  • Scanner wand
  • A cylindrical calibration target
  • Two gray calibration adaptors
  • Cables for power and data
  • USB dongle


Step-by-Step Assembly Process

  • Position the scanner base on the cart.
  • Insert the scanner wand into the base.
  • Connect the wand cable to the base, aligning the red dots.


  • Assemble and connect the power cable to a wall outlet and the scanner base.


    • Note: A green light on the scanner base confirms a working power source


  • Insert the USB dongle into the laptop's USB port.


  • Connect the ethernet cable from the scanner base to the laptop (avoid using the USB-to-ethernet adapter).



This comprehensive guide facilitates a smooth setup of your new dental scanning equipment and fully prepares you for your upcoming training session. Following these detailed instructions, you can confidently assemble your cart, connect the Trios 3 scanner, and prepare the Dell laptop. Remember, our support team is always here to assist you with any questions or concerns you may have along the way.

Was this article helpful?
9 out of 9 found this helpful
Live Support Hours
Monday - Friday: 8 am - 9pm ET Saturday: 9 am - 4 pm ET
Chat With Us
By clicking here and logging into your account on the Dandy Portal.
Call Us
At (267) 310-3332 or tap here to call us on your mobile phone.